PremiumCord HDMI FULL HD Extender over Single Cat5e/6 up to 50m

Addional discount of 12%
will be applied in shopping cart
(min. 5€ purchase)
22,99 €

0,46 € / M

Main info

The device allows you to transmit an HDMI FULL HD 1080p signal up to 50m over one network cable. - Extender contains a transmitter and a receiver, which are connected by one cable Cat5e, Cat6, Cat6A, Cat7 - Supports FULL HD 1080p up to 50m with Cat6 c
The device allows you to transmit an HDMI FULL HD 1080p signal up to 50m over one network cable. - Extender contains a transmitter and a receiver, which are connected by one cable Cat5e, Cat6, Cat6A, Cat7 - Supports FULL HD 1080p up to 50m with Cat6 cable and higher (40m with Cat5e) we recommend using a quality LAN cable with copper wires and AWG23. The quality of the LAN cable limits the transmission time. - Bandwidth 225MHz, baud rate 10.2 Gbps - HDCP support 1.3 - Compatible with HDMI 1.3 - Maximum resolution FULL HD 1080p - For resolutions: 480i @ 60Hz, 480p @ 60Hz, 576i @ 50Hz, 576p @ 50Hz, 720p @ 50 / 60Hz, 1080i @ 50 / 60Hz, 1080p @ 50 / 60Hz - Input connector: HDMI male - Output connector: HDMI male - The transmitter and receiver adapters have a connector that can be connected directly to the monitor and signal source. No additional HDMI cable is required. - The transmitter and receiver are connected directly by a cable with RJ45 connectors - The transmitter and receiver have a micro USB connector to which a short micro USB male cable is connected - USB A male, this cable is connected to the USB connector of a PC or monitor and is used to power the extender. - Extender transmits HDMI digital video, audio - Uses high quality 1x LAN cable Cat5e, Cat6, Cat6A, Cat7 for connection (for a distance of 50m use a copper cable with AWG23 wires, for example UTP Cat6 cable in meters code: sutpd6c3) - The extender must not be connected to an active computer LAN, switch, router or other active network device. The transmitter and receiver of the extender must be directly connected by a LAN cable, preferably without interruption. - The transmitter and receiver are powered by the included USB cables, which plug into the USB port - Supports PoE - only one unit must be connected to USB power, the second unit is powered from the first via a UTP cable - Power consumption: TX: 2W; RX <2W - The transmitter and receiver have a practical RESET button - Working temperature: 0 - 50 ° C - Dimensions of transmitter and receiver: 61.5 × 27 × 16.8mm - Weight of transmitter and receiver: 10g In the package: 1x Transmitter unit 1x Receiver unit 1x manual 2x power micro USB male - USB A male cables
For resolutions 480i @ 60Hz, 480p @ 60Hz, 576i @ 50Hz, 576p @ 50Hz, 720p @ 50 / 60Hz, 1080i @ 50 / 60Hz, 1080p @ 50 / 60Hz
Input connector HDMI male
Output connector HDMI male
or a distance of 50m use a copper cable with AWG23 wires, for example UTP Cat6 cable in meters code sutpd6c3)
working temperature 0 - 50 ° C
Dimensions of transmitter and receiver 61.5 × 27 × 16.8mm
Weight of transmitter and receiver 10g

Dimensions and weights

Gross weight
0.02 kg

Product codes

EAN
8592220021757
Manufacturer code
8592220021757

Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.

For this product you can select the desired delivery method at the shopping cart:

Photopoint store Pick-up


Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.

The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.

Omniva parcel terminal 

You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.

See Omniva Parcel terminal locations here.

SmartPOST parcel terminal

Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.

See SmartPOST parcel terminal locations here.

DPD parcel locker

Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.

See DPD parcel locker locations here.

Smartpost Finland parcel terminal

SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.

See SmartPOST Finland parcel terminal locations here.

Matkahuolto parcel service

Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.

See Matkahuolto outlet locations here.

Omniva courier delivery

The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment. 

The product can only be ordered from our online store and it takes from 7-10 working days for delivery within Estonia.

Product comparison

Close