Fujifilm X-E2S body, black
54982
Main info
- 16.3 megapixel APS-C X-Trans CMOS II sensor
- 3-inch fixed LCD display
- Real-time electronic viewfinder
- Integrated WiFi - use smartphone as remote
- Classic die-cast magnesium alloy body
Product has been archived
- Advanced rangefinder design
- X-Trans™ CMOS II sensor & EXR Processor II
- Full Auto mode
- AF Zone and Wide/Tracking modes
- Real Time Viewfinder
- 3.0-inch 1,040K-dot LCD
- Compact and lightweight body
16.3MP APS-C X-Trans CMOS II Sensor
A large, 16.3MP, APS-C, CMOS image sensor is integrated into the X-E2S to provide high image quality and detail. Using Fujifilm's unique X-Trans bespoke pixel array, the sensor is designed with a randomized pixel pattern to eliminate the need of an optical low-pass filter for reducing moiré and aliasing. By removing this filter from the design, higher image sharpness is possible.
For photographing in low-light situations, an ISO sensitivity of up to 51200 is provided.
EXR Processor II
Aside from benefitting low-light performance, the EXR Processor II also provides quick performance throughout the entire camera system. The camera start-up time is about 0.5 seconds, shutter lag is about 0.05 seconds, and the shooting interval time is about 0.5 seconds. Additionally, this processing power provides enough speed to capture full resolution images at a continuous rate of 7 fps for up to 18 consecutive frames.
Multiple Autofocus Modes for Speed and Accuracy
Intelligent Hybrid AF is a quick, responsive autofocus system that employs both contrast- and phase-detection methods to acquire focus quickly in a wide variety of lighting conditions and shooting situations. Clear focus can be attained in as little as 0.06 seconds to aid in catching fast-paced movement more easily. Three focus modes are available (AF-S, AF-C, and M) for greater control over how the X-E2 achieves sharp focus. The autofocus system features a 49-point Single Point mode for fast, precise focusing, as well as Zone and Wide/Tracking modes that utilize a 77-point area to better capture moving subjects. Complementing these autofocus options is a silent electronic shutter that is capable of capturing images at up to 1/32000 of a second.
Classic Camera Design
Featuring a body design reminiscent of film cameras, the X-E2S exhibits a meshing of both analog exposure controls along with intelligent automated technologies. The clean and functional body design incorporates physical shutter speed and two command dials that pair well with the manual aperture rings found on many of the XF lenses for intuitive exposure settings. Seven different buttons are customizable depending on individual needs and an easily-accessible Q Menu provides a one-touch solution to modifying some of the most frequently used camera settings, such as ISO, white balance, and file settings.
For live view monitoring, image playback, and menu navigation, both a bright, clear 2,360k-dot OLED electronic viewfinder and a 3.0" 1,040k-dot LCD monitor with reinforced glass construction are available.
FullHD Movie Recording
Full HD 1080p video recording is supported in multiple frame rates up to 50 fps with a high bit-rate of 36 Mbps. Frame rates of 60 fps, 30 fps, 25 fps, and 24 fps, are also provided to support motion picture formats across multiple regions. Up to 14 and 27 minutes of video can be recorded in full HD 1080p and 720p respectively.
Built-In Wi-Fi Connectivity
Wireless connectivity is built into the camera and allows for instant sharing of images when using the Fujifilm Camera Remote App. Sharing of imagery is further expedited by simply pressing and holding the dedicated Wi-Fi button to begin transferring immediately.
Film Simulation Mode and Advanced Filters
Taking advantage of Fujifilm's vast history in traditional film-based photography, the X-E2S integrates several Film Simulation modes to mimic the look and feel of some Fujifilm's classic film types. These include a Classic Chrome mode that delivers muted tones and deep colors. Pulling from their line of transparency films, PROVIA offers natural-looking tones for everyday shooting, VELVIA produces a more dramatic and rich tonality with deeper color saturation, ASTIA gives less contrast for a softer depiction of skin tones, and a Classic Chrome mode that delivers muted tones and deep colors. Mimicking their negative films, PRO Neg. Std. gives smooth image tones that are suitable for accurate color renditions, while PRO Neg. Hi produces a more dramatic feel with the ability to draw color out of a variety of lighting conditions. In addition to the colorful benefits of these Film Simulation modes, there are also monochrome modes that simulate the look of traditional yellow, green, and red black and white contrast filters. A sepia mode is also available for producing an inherently nostalgic look.
Sensor
APS-C
16:9, 1:1 aspect ratio available
Expandable ISO 100 – 51 200
1/3, 1/2 or 1 EV increments
Adobe RGB
Bayonet
Image stabiliser
Uses in-lens stabilization
Focusing
TTL phase detection
TTL contrast-detection
15 phase detection points
Continuous
Tracking
Manual
Electronic rangefinder
Electronic Split Image
Focus magnification
Can be locked by pressing shutter-release button halfway
Zone (3×3, 5×3 or 5×5 area selectable)
Wide area / tracking (automatic 11×7 area selection)
Exposure metering
256-zone metering
Center weighted average
Spot
1/3 EV increments
±2/3 EV
±1 EV
Shutter
Vertical-travel focal-plane shutter
Bulb
1/3 or 1/2 EV increments
1/32 000 – 1 sec (electronic shutter)
Shooting
Aperture priority
Shutter priority
Manual
SR Auto
Continuous (High)
Continuous (Low)
Self-timer 2 sec
Self-timer 10 sec
Until memory card becomes full
7 fps [High]
Up to 18 frames
White balance
Daylight
Cloudy
Fluorescent (3)
Tungsten
Underwater
Manual
Color temperature (K)
Movie recording
[HD] 1280 × 720 60p/50p
[HD] 1280 × 720 30p/25p
[HD] 1280 × 720 24p
HD: up to 27 minutes
File types
DCF
DPOF
Viewfinder
LCD monitor
Storage
SDHC
SDXC (UHS-I)
Flash
Flash on
Flash off
Slow sync
Rear curtain sync
Red-eye reduction
Commander (pre-flash suppression for optical slave)
Flashguns with standard hot shoe in manual mode
ISO 518 standard hot shoe
Interface
Fujifilm remote release cable RR-90
Features
Power source
Body
Battery charger BC-W126
Shoulder strap
Body mount cover
Hot shoe cover
Product codes
Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.
For this product you can select the desired delivery method at the shopping cart:
Photopoint store Pick-up
Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.
The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.
Omniva parcel terminal
You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.
See Omniva Parcel terminal locations here.
SmartPOST parcel terminal
Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.
See SmartPOST parcel terminal locations here.
DPD parcel locker
Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.
See DPD parcel locker locations here.
Smartpost Finland parcel terminal
SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.
See SmartPOST Finland parcel terminal locations here.
Matkahuolto parcel service
Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.
See Matkahuolto outlet locations here.
Omniva courier delivery
The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment.