Home page » Computers & IT»Computer components»PSU»Lepa power supply unit MX-F1 500W

Lepa power supply unit MX-F1 500W

Main info

The LEPA MX-F1-Series is designed for gamers who have high standards regarding performance but also care about price. The white body with Formula 1 flag pattern provides a sporty and aggressive look and improves the appearance of the PC's. By using h

Product has been archived

The LEPA MX-F1-Series is designed for gamers who have high standards regarding performance but also care about price. The white body with Formula 1 flag pattern provides a sporty and aggressive look and improves the appearance of the PC's. By using high quality components and a modern circuit designs, LEPA reduces energy losses of its power supplies to the minimum. With a peak efficiency of 87 percent MX-F1 meets the requirements of EU Regulation 617/2013, which will be applied from July 1st 2014. The regulation requires that PC systems must achieve at least 82 percent efficiency at 20 and 100 percent load and 85 percent efficiency at 50 percent load to obtain the European CE mark. The power supply operates also in standby mode and therefore complies to the EU standard ErP Lot 6 2013 for computer systems (<0.5 W in standby / only in combination with an ErP Lot 6 2013 compliant motherboard).

From 500 watts, the MX-F1 Series is equipped with two PCI-E 6+2P connectors and allows the operation of high-performance graphics cards. For the effective protection of the components, LEPA has installed safeguards against over-voltage, overload and short circuit.
The power supplies of the MX-F1-Series are designed for low noise operation. The manufacturer uses a 12 cm fan with durable hydraulic bearing that works with virtually no friction. So a quiet and efficient cooling is ensured even in the heat of battle.

Design ATX
Power
Total 500 watt(s)
Combined Power 3,3V / 5V 130 watt(s)
Combined Power 12V 408 watt(s)
Efficiency 81 % - 87 %
Standard ATX 2.03, ATX12V 2.0, EPS
PFC Type Aktiv-PFC
Power Switch Yes
Fan
Fan 1 1x 120 mm
Power Supply
Current 4 Amperage (A)
Current Levels
+3,3V 25 Amperage (A)
+5V 20 Amperage (A)
+5Vsb 2.5 Amperage (A)
-12V 0.3 Amperage (A)
+12V Total 34 Amperage (A)
V1 34 Amperage (A)
Protection Featuress Überspannungsschutz (OVP), overloadschutz (OLP/OPP), Kurzschlussschutz (SCP)
Ports
Main Ports 20-pin ATX 1
24-pin ATX12V-2.x 1
EPS 1
Additional Ports 4+4-pin 12V 1
Drive Connections 4-pin 5,25" 4
4-pin 3,5" 1
15-pin SATA 5
Graphics Connector 6+2-pin Graphics 2
Product dimensions 150 x 86 x 140 mm

Product codes

EAN
4710445321269
Manufacturer code
N500-SB-EU

Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.

For this product you can select the desired delivery method at the shopping cart:

Photopoint store Pick-up


Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.

The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.

Omniva parcel terminal 

You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.

See Omniva Parcel terminal locations here.

SmartPOST parcel terminal

Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.

See SmartPOST parcel terminal locations here.

DPD parcel locker

Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.

See DPD parcel locker locations here.

Smartpost Finland parcel terminal

SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.

See SmartPOST Finland parcel terminal locations here.

Matkahuolto parcel service

Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.

See Matkahuolto outlet locations here.

Omniva courier delivery

The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment. 

The product is out of stock. For additional availability and preorder information please contact us here.

Product comparison

Close