Home page » Photo»Lightning»Flashlights»Nissin flash MG8000 for Canon

Nissin flash MG8000 for Canon

Main info

Professional flash with extreme high heat resistance

Product has been archived

High heat resistance materials and quartz tube design reduce the heat effects significantly, emitting with full flash without overheating problems and achieving above 1000 times continuum.
Capture the important moments and reliably in the extreme case of high power and high frequency flash shooting, without concerns about overheating flash effects.
For full frame digital SLR camera, you can greatly expand the flash illumination angle and also weaken the shadow of the edge from direct flash lighting, suitable for portrait photography
A firmware upgrade service is available for the MG8000 Extreme, which provides a USB service terminal to upload the latest software.

Color and Auto Rotate Display bears simple and user friendly features of our design concept
The Color Display will automatically follow camera angle in different position and six icons interface gives user friendly operation and representing different menus – Auto, TTL, Manual/Av, Multi, Wireless TTL (Master/Remote) and Customer Setting.

Various Functions – TTL, Manual/Av, Multi Flash
TTL: Supporting Canon E-TTL/E-TTL II. Flash light is automatically controlled by the camera but the flash exposure value can be compensated.
Manual: Flash power can be adjusted manually at 22 levels, from full power to 1/128 power at every 1/3 stops. The appropriate distance to the subject is shown in the display in accordance with the aperture value set on the camera.
Av priority: The flash light can be automatically controlled by the photo sensor built-in the flash unit instead of TTL metering. The F. Stop can be set from F1.4~F16. The distance at the F-stop set on the flash and camera is shown in the display.
Multi Flash: The power ratio can be set from 1/8 to 1/128.

The best solution for off camera flash technique
The MG8000 Extreme Wireless TTL system support Canon wireless TTL system. MG8000 Extreme can be used jointly with Canon original flash as either Master and Remote (Slave).
The MG8000 Extreme also supports digital (pre-flash system) and analogue (film type camera’s flash and/or studio flash under both of Manual and Av. priority mode.
Multi-Flash: Repeating flash for multi-exposure image in one frame.
The power ratio can be set from 1/8 to 1/128.

Sub-Flash
The MG8000 Extreme provides an extra small flash (GN12) below the main flash. This small flash gives a fill-in light while bouncing the main flash. Bouncing the light may shadow the underside of face, and this fill-in flash brightens up the shadow. The power ratio of Sub-Flash can be set from 1/1 to 1/128 

Flash head

Guide number
60 (m, ISO 100)
Colour temperature
5600 K
Dedication
Canon EOS
Focal length coverage
24 – 105 mm
Coverage with wide panel
18 mm
Auto zoom
Yes
Integrated reflector card
No
Secondary flash
Yes
Secondary flash guide number
12 (ISO 100)
Vertical swivel
Yes
Horizontal swivel
Yes
Modelling light
Yes
AF assist light
Yes

Display

Display type
TFT LCD
Backlight
Yes
Flash range indication
Yes
Flash readiness indication
Yes

Flash modes

Auto exposure control
E-TTL
E-TTL-II
TTL flash control
Yes
TTL slave mode
Yes
Automatic flash mode
Yes
Manual flash mode
Yes (22 steps in 1/3 EV increments)
Slave mode (manual)
Yes
Automatic fill-in flash
Yes
2nd curtain sync
Yes
High speed sync
Yes
Flash exposure compensation
Yes (±3 EV)
Flash bracketing
Yes

Power

Power source
4 × AA alkaline batteries or NiMH rechargable batteries
Alkaline-magnesium or lithium batteries
NiMH rechargeable batteries
Battery life
150 – 1500 flashes according to the mode (with alkaline batteries)
Recycle time
0.1 – 5.5 sec (depending on power source and flash power)
Energy saving mode
Yes
Auto off
Yes
External power source
Nissin Power Pack PS300
Canon Power Assist Pack CP-E4

General

Body material
Plastic
Mounting foot material
Metal
Height (mm)
147
Width (mm)
127
Depth (mm)
79
Weight (g)
416
Package contents
Flash
Wide angle converter
Flash stand
Case

Product codes

EAN
4938574800015

Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.

For this product you can select the desired delivery method at the shopping cart:

Photopoint store Pick-up


Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.

The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.

Omniva parcel terminal 

You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.

See Omniva Parcel terminal locations here.

SmartPOST parcel terminal

Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.

See SmartPOST parcel terminal locations here.

DPD parcel locker

Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.

See DPD parcel locker locations here.

Smartpost Finland parcel terminal

SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.

See SmartPOST Finland parcel terminal locations here.

Matkahuolto parcel service

Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.

See Matkahuolto outlet locations here.

Omniva courier delivery

The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment. 

This product is in stock and ready for dispatch. Order now from Photopoint web store and this product will be on your doorstep in 1-2 working days.

This product is available to try and buy from the following Photopoint retail stores:

Photopoint, Kristiine keskus: Endla 45, Tallinn

Photopoint, Ülemiste keskus: Suur-Sõjamäe 4, Tallinn

Photopoint, Tartu Kaubamaja: Riia 1, Tartu

Photopoint, Rocca al Mare: Paldiski mnt 102, Tallinn

Photopoint, Kvartal: Riia 2, Tartu

Photopoint, Lõunakeskus: Lääneringtee 39, Tartu

NB! Retail store stock status is not in real time and does not consider reservations. For a detailed availability please contact the retail store.
Online orders may be delivered from another store. You will receive a notification when the goods are ready to be picked up.

This product is available for rent from the following Photopoint retail stores:

Photopoint, Rocca al Mare: Paldiski mnt 102, Tallinn


Rental prices
1 day 15 €
1 week 45 €
2 weeks 75 €

Read rental conditions here

Product comparison

Close