Pealeht » Arvuti & IT»Lisaseadmed»UPS tööjaamadele»UPS RACK ARMAC R/1000I/PF1 ON-LINE 1000VA 8X IEC C13 OUTLETS USB-B LCD METAL CASE

UPS RACK ARMAC R/1000I/PF1 ON-LINE 1000VA 8X IEC C13 OUTLETS USB-B LCD METAL CASE

399 €

Järelmaksuga ostes alates 13,60 € kuus

Ava järelmaksukalkulaator

Photopointi järelmaksu kalkulaator

Järelmaksuga ostmiseks lisa tooted ostukorvi ja vali seal makseviisiks järelmaks

Põhiinfo

Power FactorThe highest power factor, maintained at 1.0 ratio, will ensure that almost all the power transferred to the device at the input, will be given back in the form of output power. Power consumption for the device's own needs is marginal, r
Lisa ostukorvi

Tarneaeg 7-10 tööpäeva

See toode tuuakse sulle tasuta koju kätte

14 14 päeva tagastusõigus internetist ostmisel

Vabandage, tooteandmed on tõlkimisel. Kui vajate toote võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel info@photopoint.ee. Saadame teile kiirelt soovitud tõlke.


Power Factor

The highest power factor, maintained at 1.0 ratio, will ensure that almost all the power transferred to the device at the input, will be given back in the form of output power.
Power consumption for the device's own needs is marginal, resulting in high energy efficiency. As a result, the maximum rated power of connected devices can be 1000W with a nominal power of 1000VA.
Multiple installation options and helpful mounting accessories included

The unit can be mounted in a 19" Rack cabinet in two ways: with mounting ears alone (included with the product) or with the additional use of Armac's mounting rail kit - R/0019, with this option being recommended, due to better stability and security of the Battery Pack. Special stands are also included with the UPS, allowing the unit to be installed vertically, outside the Rack. If we want to position the UPS and more than one Battery Pack module in this way, we have this possibility, thanks to the stand extensions. The package also includes a supply of M6 screws. Both products made of metal alloy, which guarantees the solidity of the material.

Immediate response

A work interruption due to an outage caused by a lack of power can translate into serious financial losses and the loss of vital data. With the Armac R/1000I/PF1, you don't have to worry about this. The unit operates in continuous mode, which means it does not have to switch to battery operation in the event of a failure. The lack of response time is an advantage in terms of negating the risk of damage to the supported device(s).
Improved battery life

Extended battery life? With the Armac R/1000I/PF1 UPS it's possible, and that's due to a change in the default "Cut-Off" voltage value, which directly reduces the risk of excessive battery discharge, extends battery life and eliminates the chances of battery damage. Expecting longer maintenance at the expense of lifespan? With the settings available from the LCD panel, you can change the voltage value yourself. What's more, every 60 days the UPS will perform an automatic battery discharge test, all without requiring any action from the user. This test will not only extend the battery life, but also minimize the risk of potential servicing. See yourself how simple it is.

Performance you can count on

We created the Armac R/1000I/PF1 UPS for the most demanding tasks, such as protecting power-hungry computers, workstations, or equipment with high power consumption. The UPS manages such heavy-duty work thanks to its more powerful 9Ah batteries, with a Power Factor of 1.0. What's more, this model has 8 IEC 320 C13 output sockets, allowing you to protect several devices at the same time. UPS of this series always provides full sine wave, it was created for sensitive equipment with high power consumption. The double conversion function makes the UPS have ideal electrical performance at the output, it converts all the incoming AC and then supplies the device with the current already generated by the UPS itself. The transfer time between AC and DC modes is zero.
Total safety

The correct operation of the UPS is supervised by a specially built-in processor, which controls the parameters of the unit itself, its proper operation and the power supply to connected equipment. The technology used in the UPS also ensures automatic battery charging in Stand-By mode and automatic start-up when the main power returns.

Perfect for sensitive equipment

Due to the nature of its operation (full sine wave when operating in battery mode), the UPS can be used with devices that have an electric motor or heater, such as laser printers, scanners, garage doors and entry gates, electric roller shutters, central heating furnaces. You also do not need to invest in an expensive ground fault circuit breaker. This model can easily work with a circuit breaker of up to 30 mA.
Convenience of monitoring and easy transport

Connect the UPS to your computer (via USB or RS-232) and use the PowerManager II software, which will allow you not only to manage but also to monitor the operation of the device. Its simple interface will ensure that even less advanced users can handle the tool. Want to transport the device from place to place? From now on it is possible. All major electrical components like capacitors or coils have been additionally reinforced with an extra layer of glue between them and the PCB laminate. This solution increases reliability and safety making it even easier and more secure to move the device from place to place.

Lisagarantiid ja kindlustused:

  • Lisagarantii + kindlustus (2 + 1 aastat) - 69,99 €
  • Lisagarantii (2 aastat) - 49,99 €
  • Kindlustus (1 aasta) - 59,99 €
  • Kindlustus (2 aastat) - 99,99 €

Sobiva lisagarantii ja kindlustuse saad valida ostukorvis.

Mõõtmed ja kaalud

Brutokaal
13.5 kg
Pakendi laius
43.8 cm
Pakendi kõrgus
8.8 cm
Pakendi pikkus
38.5 cm

Toote koodid

EAN
5901969429985
Tootja kood
R/1000I/PF1

Kuidas kaup minuni jõuab?

Alates 99 € tellimuste transport on Eesti-siseselt tasuta. Toote täpsemat tarneaega vaata vahelehelt "Saadavus".  

Selle toote puhul saad valida ühe järgmistest tarneviisidest:

Photopointi kauplusesse

Väiksemate toodete puhul on mugav minna kaubale järele Photopointi esinduskauplusesse. Nii on kauba kättesaamine Sinu jaoks täiesti tasuta, sest kauplusesse tellides ei lisandu postikulu ka siis, kui tellimus jääb alla 99 €. Kauba kauplusesse jõudmisest antakse Sulle teada e-kirja teel.

Photopointi kauplused asuvad Tallinnas ja Tartus. Täpsemalt saad poodide asukohti ja kontaktandmeid vaadata siit.

Omniva pakiautomaati

Vali kättesaamise kohaks endale sobivaim Omniva pakiautomaat. Kui pakk automaati jõuab, saadetakse Sulle SMS koos unikaalse koodiga. Mine kohale, sisesta kood automaati ja võta pakk. Nii lihtne ongi. Omniva pakiautomaadid asuvad hoonetest väljas – nii saad pakile järele minna olenemata kellaajast ja kuupäevast. 

Lähima pakiautomaadi saad Photopointi veebipoes valida ostukorvis, tarneviisi juures olevast nimekirjast. Omniva kõikide pakiautomaatide asukohti saad vaadata siit.

SmartPOST pakiautomaati

Ehk on Sinule sobivaimas kohas hoopis SmartPOST pakiautomaat? Kui nii, siis vali Photopointi veebipoes ostukorvis tarneviisiks see sobivaim. Kui pakk automaati jõuab, saadetakse Sulle SMS koos unikaalse koodiga. Mine kohale, sisesta kood automaati ja võta pakk. Kiire ja lihtne.

Kõikide SmartPOST pakiautomaatide asukohti saad vaadata siit.

DPD pakiautomaati

Vaata kindlasti üle ka DPD pakiautomaatide asukohad. Neid on tänaseks juba üle Eesti. Vali Photopointi veebipoes ostukorvis sobiv DPD pakiautomaat ning kui pakk kohale jõuab, saadetakse Sulle SMSiga kood.

DPD pakiautomaatide asukohti saad vaadata siit.

SmartPOST Finland pakiautomaati

Telli kaup endale Soome või saada see enda Soomes elavale sõbrale. SmartPOST Finland pakiautomaadid toimivad sama lihtsalt nagu Eestisisesed automaadid. Vali Photopointi veebipoes ostukorvis sobiv SmartPOST Finland automaat. Kui pakk kohale jõuab, saadetakse saajale SMS koos unikaalse koodiga. Mine kohale, sisesta kood automaati ja võta pakk.

SmartPOST Finland automaatide asukohti saad vaadata siit.

Matkahuolto väljastuspunkti Soomes

Telli kaup Soome või saada see enda Soomes elavale sõbrale. Vali Photopointi veebipoes ostukorvis sobiv Matkahuolto väljastuspunkt ning kui pakk kohale jõuab, saadetakse Sulle SMS või e-mail teavitusega. Mine kohale, näita isikut tõendavat dokumenti ja võta pakk.

Matkahuolto teeninduspunkte saad vaadata siit.

Kulleriga koju või kontorisse

Kulleriga saad kauba tellida koju, kontorisse või mujale, kus kauba kätte toimetamise ajal viibid. Kaup toimetatakse aadressile tööpäevadel kella 08:00-17:00.

Enne kauba kohale jõudmist helistab kuller kontaktile. Kaupa "koju" tellides hoolitse, et telefon oleks käepärast ning volitatud isik kauba kohale jõudmise ajal sihtkohas seda vastu võtmas. Eriti just suuremate esemete tellimisel palume arvestada, et kuller toimetab kauba vaid välisukseni. 

Toode on saadaval Photopointi veebipoes 7-10 tööpäevase tarneajaga. Esinduskauplustes kohapeal seda toodet müügil ei ole.

Avasta veel

Tootevõrdlus

Sulge