Sākumlapa » Datori & IT»Papildus ierīces»UPS darba stacijām»UPS ARMAC OFFICE ON-LINE PF1 1000VA LCD 4X IEC C13 METAL CASE

UPS ARMAC OFFICE ON-LINE PF1 1000VA LCD 4X IEC C13 METAL CASE

279,99 €

Ikmēneša maksājums sākot no 9,54 €

Atvērt nomaksas kalkulatoru

Photopoint nomaksas kalkulators

Lūdzu, pievienojiet preces savam iepirkumu grozam un izvēlieties maksājuma veidu "nomaksa"

Pamatinformācija

Power FactorThe highest power factor, maintained at 1.0 ratio, will ensure that almost all the power transferred to the device at the input, will be given back in the form of output power. Power consumption for the device's own needs is marginal, r
Pievienot grozam

Piegāde 7-10 darba dienu laikā

Bezmaksas piegāde

14 14 dienu atgriešanas politika, iepērkoties tiešsaistē

Power Factor

The highest power factor, maintained at 1.0 ratio, will ensure that almost all the power transferred to the device at the input, will be given back in the form of output power.
Power consumption for the device's own needs is marginal, resulting in high energy efficiency. As a result, the maximum rated power of connected devices can be 1000W with a nominal power of 1000VA.
Immediate response

A work interruption due to an outage caused by a lack of power can translate into serious financial losses and the loss of vital data. With the Armac O/1000I/PF1, you don't have to worry about this. The unit operates in continuous mode, which means it does not have to switch to battery operation in the event of a failure. The lack of response time is an advantage in terms of negating the risk of damage to the supported device(s).

Improved battery life

Extended battery life? With the Armac O/1000I/PF1 UPS it's possible, and that's due to a change in the default "Cut-Off" voltage value, which directly reduces the risk of excessive battery discharge, extends battery life and eliminates the chances of battery damage. Expecting longer maintenance at the expense of lifespan? With the settings available from the LCD panel, you can change the voltage value yourself. What's more, every 60 days the UPS will perform an automatic battery discharge test, all without requiring any action from the user. This test will not only extend the battery life, but also minimize the risk of potential servicing. See yourself how simple it is.
Performance you can count on

We created the Armac O/2000I/PF1 UPS for the most demanding tasks, such as protecting power-hungry computers, workstations, or equipment with high power consumption. The UPS manages such heavy-duty work thanks to its more powerful 9Ah batteries, with a Power Factor of 1.0. What's more, this model has 4 IEC 320 C13 output sockets, allowing you to protect several devices at the same time. UPS of this series always provides full sine wave, it was created for sensitive equipment with high power consumption. The double conversion function makes the UPS have ideal electrical performance at the output, it converts all the incoming AC and then supplies the device with the current already generated by the UPS itself. The transfer time between AC and DC modes is zero.

Total safety

The correct operation of the UPS is supervised by a specially built-in processor, which controls the parameters of the unit itself, its proper operation and the power supply to connected equipment. The technology used in the UPS also ensures automatic battery charging in Stand-By mode and automatic start-up when the main power returns.
Perfect for sensitive equipment

Due to the nature of its operation (full sine wave when operating in battery mode), the UPS can be used with devices that have an electric motor or heater, such as laser printers, scanners, garage doors and entry gates, electric roller shutters, central heating furnaces. You also do not need to invest in an expensive ground fault circuit breaker. This model can easily work with a circuit breaker of up to 30 mA.

Convenience of monitoring and easy transport

Connect the UPS to your computer (via USB or RS-232) and use the PowerManager II software, which will allow you not only to manage but also to monitor the operation of the device. Its simple interface will ensure that even less advanced users can handle the tool. Want to transport the device from place to place? From now on it is possible. All major electrical components like capacitors or coils have been additionally reinforced with an extra layer of glue between them and the PCB laminate. This solution increases reliability and safety making it even easier and more secure to move the device from place to place.

Pagarinātās garantijas un apdrošināšana:

  • Additional warranty + insurance (2 + 1 year) - 59,99 €
  • Additional warranty (2 years) - 39,99 €
  • Insurance (1 year) - 39,99 €
  • Insurance (2 years) - 69,99 €

Izvēlieties piemērotu pagarināto garantiju un apdrošināšanu, veicot norēķinu.

Izmēri un svars

Bruto svars
11.2 kg
Iepakojuma platums
14.5 cm
Iepakojuma augstums
22.5 cm
Iepakojuma garums
34.7 cm

Produktu kodi

EAN
5901969429930
Ražotāja kods
O/1000I/PF1

Pasūtījumiem virs 99 € Photopoint piedāvā bezmaksas piegādi Igaunijas teritorijā. Ieskatieties cilnē „Piegāde”, lai iegūtu precīzāku piegādes cenu aprēķinu.

Jūs varat izvēlēties vēlamo piegādes veidu iepirkumu grozā:
Omniva paku termināls

Jūs varat pasūtīt preces uz jebkuru no Omniva paku termināļiem. Izvēlieties vēlamo termināli iepirkumu grozā. Līdzko sūtījums ieradīsies, Jums tiks nosūtīts SMS ziņojums ar unikālu kodu. Dodieties uz termināli nedēļas laikā, ievadiet kodu un paņemiet savu sūtījumu. Tas ir tieši tik vienkārši!
Omniva paku termināļu adreses skatīt šeit. Omniva kurjera piegāde

Kurjers nogādās Jūsu preces no Photopoint tieši uz Jūsu norādīto adresi. Piegāde tiek veikta darba dienās no 08:00 līdz 17:00. Kurjers Jums piezvanīs pirms ierašanās, tāpēc turiet savu telefonu tuvumā. Lūdzu, pārliecinieties, ka piegādes galamērķī atrodas persona, kas būs ir tiesīga saņemt sūtījumu.

Prece var tikt pasūtīta tikai mūsu interneta veikalā. Piegāde sākot no 7-10 darba dienām Igaunijas teritorijā.

Preču salīdzinājums

Aizvērt