Sākumlapa » Elektronika»Drošības sistēmas»Dūmu detektori»Smoke sensor FireAngel

Smoke sensor FireAngel

Pamatinformācija

Prece ir arhivēta

FireAngel SB5 smoke detector

The FireAngel SB5 smoke detector is a top-class device that protects against the risk of fire.

The product was created by a renowned manufacturer and European leader in the production of smoke and carbon monoxide detectors - the English concern FireAngel Safety Technology. The company has been listed on the London Stock Exchange since 2014, and since 2019 it has one of the most modern sensor production plants in Tczew, Poland.

The FireAngel SB5 smoke detector is equipped with a sensitive optical sensor that detects even a small threat at an early stage. It alerts people in the danger zone with a sound signal with a strength of 85 dB and clear light signals.

Compliance with the highest safety requirements is confirmed by a certificate of compliance with the EN14604 standard, issued by the renowned Intertek laboratory.

Where and why is it worth installing FireAngel SB5 smoke detectors?

Thanks to their high efficiency, FireAngel SB5 smoke detectors can be installed both in single and multi-family buildings, in flats and apartments, as well as in various public buildings.

Due to the specificity of the problem, which is fire, it is very important to install this type of sensors in all places where a fire may appear.

Smoke, which is always the first sign of a fire, begins to fill the room from the ceiling, so this is where sensors of this type should be installed.

Statistically, most household fires occur at night. It is during the deepest phase of sleep that the senses of smell and hearing are least active. Therefore, it is necessary to use detectors that will react at an early stage of a fire and alert users, giving them a chance to react and evacuate.

It is recommended that at least one smoke detector is located on each floor of the building. It is also advisable to install smoke detectors in every bedroom, living room and hallway. A greater number of sensors will shorten the reaction time to smoke, the source of which may appear in various places in the building.

In the event of a small amount of smoke inside the detector, a FireAngel optical sensor will observe the emerging hazard and trigger a loud audible alarm of 85 dB (measured at a distance of 3 m).

Why is it worth choosing the SB5 smoke detector?

The FireAngel SB5 smoke detector reacts very quickly even to small amounts of smoke in the air. If the alarm threshold is exceeded, the sensor will trigger a loud audible alarm and an optical alarm, giving users the chance to take action or evacuate.

The sensor has a small housing (only 9 cm in diameter) and is very easy to install. It is enough to attach it to the ceiling through the mounting plate with the dowels included in the set. After inserting the battery and fixing it to the plate, the device will automatically start up and continuously monitor the presence of smoke in the room.

Thanks to the power supply from a typical 9V battery, which is included in the set, the device will provide long-term protection while maintaining low operating costs. If necessary, the device will inform you to replace the battery with a new one.

In the event of a false alarm, the user can silence the audible signal by pressing the TEST button in the center of the housing. The same button allows you to carry out regular checks of the correct operation of the device.

The FireAngel SB5 smoke detector has a 5-year manufacturer's warranty and a 10-year service life. All this time, the device will provide full protection against the risk of fire, and after that, it will signal the end of the operating period and the need for replacement.

Thanks to the use of unique solutions and patented technologies, FireAngel SB5-INT smoke detectors provide complete protection against the risk of fire, which has been confirmed by reliable and independent tests and certificates.


Detector Smoke
Alarm Sound
Technologies Advanced sensor Optical
Special functions The sensor has a low battery and end-of-life signaling. The TEST button and the self-test function allow you to check the sensor's operating status
Power supply Powered by a 9V battery
Color white
Accessories included 9V battery Instructions in Polish Warranty Card Pins for assembly
Dimensions 9 x 9 x 3,3 cm
Weight 113
Warning

Izmēri un svars

Bruto svars
0.18 kg
Iepakojuma platums
11 cm
Iepakojuma augstums
12.5 cm
Iepakojuma garums
5.5 cm

Produktu kodi

EAN
816317004750
Ražotāja kods
MOANGSNFASB5INT

Pasūtījumiem virs 99 € Photopoint piedāvā bezmaksas piegādi Igaunijas teritorijā. Ieskatieties cilnē „Piegāde”, lai iegūtu precīzāku piegādes cenu aprēķinu.

Jūs varat izvēlēties vēlamo piegādes veidu iepirkumu grozā:
Omniva paku termināls

Jūs varat pasūtīt preces uz jebkuru no Omniva paku termināļiem. Izvēlieties vēlamo termināli iepirkumu grozā. Līdzko sūtījums ieradīsies, Jums tiks nosūtīts SMS ziņojums ar unikālu kodu. Dodieties uz termināli nedēļas laikā, ievadiet kodu un paņemiet savu sūtījumu. Tas ir tieši tik vienkārši!
Omniva paku termināļu adreses skatīt šeit. Omniva kurjera piegāde

Kurjers nogādās Jūsu preces no Photopoint tieši uz Jūsu norādīto adresi. Piegāde tiek veikta darba dienās no 08:00 līdz 17:00. Kurjers Jums piezvanīs pirms ierašanās, tāpēc turiet savu telefonu tuvumā. Lūdzu, pārliecinieties, ka piegādes galamērķī atrodas persona, kas būs ir tiesīga saņemt sūtījumu.
Prece nav pieejama. Papildus informācijai par pieejamību un iepriekšēju pasūtīšanu, lūdzu, sazinieties ar mums šeit.

Preču salīdzinājums

Aizvērt